Hudco Formula 3100

Tile and Structural Adhesive

Description

HUDCO Formula 3100 epoxy adhesive is a high-strength adhesive. Supplied as two contrasting colored thixotropic pastes. The user can easily monitor while blending them into the third and final color. Its buttery viscosity and high thixotropy keeps HUDCO Formula 3100 in place during application. Although developed primarily for bonding ceramic tile to itself or to metal, it readily bonds to most other solid substrates and shows superior adhesion at temperatures up to 300° F. It is especially useful for bonding dissimilar materials where differential expansion and contraction during temperature variations or vibrations would cause release of other adhesives.

Uses

• Installation of ceramic tile to steel or aluminum.
• All high strength bonding requirements for similar and dissimilar substrates.
• General purpose adhesive where high strength is required with lap shear strength exceeding 3400 P.S.I.
• Demonstrates superior adhesion at temperatures even above 300°F.

Properites

• Intial Curing Time...................2 Hours @ 70 °F
• Final Curing Time....................2 Hours @ 300 °F
• Viscosity............................approx. 6000 poise
• Lap Shear Strength: (min)
• Steel to Steel (ASTM-D 1002)........3400 PSI - @70 °F
• Concrete to Concrete (ASTM-C382)....2800 PSI (dry)
• Volatile content cured system. max...0.3%
• Water absorption (ASTM-D570) max.....0.5%
• Shrinkage during cure (ASTM-C383)....Passes

Surface Preparation

A) Surface of substrates must be clean and sound.

(B) Remove grease, oil, or other foreign material with acetone, wire brushing, or sandblasting. Acid etching the surface is acceptable if followed by thorough flushing with clean water. Surface must be dry before applying.

Mixing

Combine equal amounts of HUDCO Formula 3100 Resin with HUDCO Formula 3100 Curing Agent (Hardener) by volume. Mix thoroughly for several minutes making sure all the resin is blended with all the curing agent. Accurate measuring and mixing are vital to complete curing and optimum performance.

Packaging

Handling Precautions

CAUTION: For Industrial Use Only. Keep Away From Children.

HUDCO Formula 3100 Resin contains epoxy resin which is harmful if swallowed. After prolonged exposure it may irritate skin and cause sensitization and/or dermatitis.

HUDCO Formula 3100 Curing Agent contains organic amine compounds which are harmful if swallowed. After prolonged exposure or repeated skin contact it may cause irritation, sensitization and/or derrnatitis.

Emergency and First Aid Procedures

• Eye Contact - Irrigate with clean water for 15 minutes and call a physician.
• Skin Contact - Wash with soap and water.
• Inhalation - Remove to fresh air and provide oxygen if necessary.
• Ingestion - Call a physician at once. Give milk or white of egg beaten with water. Then give a tablespoon of salt in a glass of warm water to induce vomiting.

Storage

HUDCO Formula 3100 Resin and Curing Agent should be stored in a cool, dry area. Shelf life is a minimum of one year in unopened containers when stored at 60°F - 85°F.

Protection Procedures

If used in a confined or an enclosed area, use an air supplied mask or respirator with canister for organic vapors and provide mechanical exhaust ventilation. Use protective gloves, safety glasses, and protective clothing. Avoid contact with skin and clothing. Contaminated clothing should be laundered before wearing again. Contaminated shoes should be thoroughly cleaned before wearing again.

Warranty

Because the storage, handling and application of these materials are beyond our control, we can accept no liability for the results of their use. Our liability is limited only to replacement of any material proven defective in manufacture. We suggest users try small applications to determine the suitability of the product for their intended use.